PWR MOD SWITCHED 120/277V

3-Wire Fluorescent Power Module
• Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim fluorescent lights that have Lutron® Hi-lume® and Eco-10® (Eco Series) line-voltage control electronic dimming ballasts.
• Utilizes Softswitch® arcless switching technology.
• Up to 3 power modules may be wired on a single GRAFIK Eye zone.
• Models available for 120 V control power.
• Models available for 120 V or 120 - 277 V load power.

Works with 120 V versions of:
• Lutron 3-wire fluorescent dimmers (consult Lutron for Vierti®); see approved list in the dimmers & switches specification guide at www.lutron.com
• GRAFIK Eye QS control units
• GRAFIK Eye 3000 Series control units
• LP, LCP, and GP dimming panels
• HomeWorks® remote power panels

Power
• Control / load power:
120 V / 120 V
120 V / 120-277 V
50/60 Hz, phase-to-neutral.
• Load (output) power: Phase independent of control unit.

Sources/Load Types
• Operates Lutron® Hi-lume®, Eco-10® (Eco Series), Compact SETM, EcoSystem®, and EcoSystem Compact line-voltage control electronic dimming ballasts with a smooth continuous Square Law dimming curve.

Key Design Features
• Patented RTISSTM circuitry compensates in real time for incoming line voltage variations: Compensates for +/-2% change in RMS voltage/cycle and +/-2% Hz change in frequency/second.
• Provides air-gap off.
• Module protects itself during temporary over-current conditions on dimmed output.
• Two LEDs on front of unit provide diagnostic information (visible when faceplate is removed).

Terminals
Accept up to two 12 AWG (2.5 mm2) wires.

Environment
• 32 to 104 °F (0 to 40 °C). Relative humidity less than 90% non-condensing.
• Indoor use only.
• Maximum heat output of module: 15 BTU/hour.

Mounting
• Surface or recess mount.
• Power module is UL tested and approved for use in spaces designed for environmental air handling.